ASB-xIV
Cell line · Product number 400120
ASB-xIV cells, originating from a female Balb/c mouse, closely mimic large cell carcinoma that has been induced by chrysotile asbestos in mouse lung cells...
Recommended (freshest lot)
01General information
- Description
ASB-xIV 细胞来源于雌性 Balb/c 小鼠,与温石棉在小鼠肺细胞中诱发的大细胞癌非常相似。这些细胞具有上皮形态的单层粘附性,是原发性鳞状细胞癌(PSCC)研究的典范模型。它们的结构和功能特点使其特别适合于详细研究 PSCC 的细胞过程和病理机制。
ASB-xIV 细胞系的特点是 "发炎 "或 "发热 "肿瘤,这表明其免疫细胞浸润程度较高,因此对免疫疗法的反应更为敏感。这种敏感性是使用 ASB-xIV 细胞评估免疫检查点疗法(ICT)疗效的关键。这些细胞已显示出对此类疗法的明显反应性,这使它们在以免疫疗法疗效为重点的肿瘤研究中显得弥足珍贵。此外,虽然维甲酸能有效抑制这些细胞在小鼠移植癌中的生长,但维生素 C 却未能产生类似的效果。尽管 ASB-xIV 细胞的倍增时间约为 70 小时,但它们仍能保持强劲稳定的生长,这对于建立实验重现性所需的一致可靠的体外培养至关重要。
- Tissue
- 肺部
- Disease
- 肺鳞癌
02Classification
- Organism
- Mouse
- Sex
- Unspecified
- Growth properties
- Adherent
- Biosafety level
- 1
03Characteristics
- Morphology
- 上皮样
- Tumourigenic
- 是,在 Balb/c 小鼠中
- Doubling time
- 70 小时
04Identifiers
- Citation
- ASB-xIV(Cytion 目录编号 400120)
- NCBI TaxID
- 10090
- Cellosaurus
- CVCL_5686
05Expression and susceptibility
- Viruses
- MAP 测试:阴性(仙台病毒、Ektromelie 病毒、多瘤病毒、K 病毒、Kilham 病毒、Reo 3 病毒、PVM 病毒、LCM 病毒、M.pulmonis 病毒、MVM 病毒、Theiler's GD VII 病毒、Toolan's H-1 病毒、MHV 病毒、LDV 病毒、RCV/SDA 病毒、M-腺病毒、B.piliformis 病毒)。
06Handling and culture
- Culture medium
- DMEM,w:4.5 克/升葡萄糖,w:4 毫摩尔 L-谷氨酰胺,w:3.7 克/升 NaHCO3,w:1.0 毫摩尔丙酮酸钠(Cytion 编号 820300a)。
- Incubation atmosphere
37°C, 5%CO2, 加湿环境。
- Supplements
- 在培养基中添加 10% FBS
- Dissociation reagent
- Accutase
- Subculturing
- 去除粘附细胞上的旧培养基,用不含钙和镁的 PBS 冲洗。T25 烧瓶用 3-5 毫升 PBS,T75 烧瓶用 5-10 毫升。然后用 Accutase 完全覆盖细胞,T25 烧瓶用 1-2 毫升,T75 烧瓶用 2.5 毫升。让细胞在室温下孵育 8-10 分钟,使其分离。孵育后,用 10 毫升培养基轻轻混合细胞使其重悬,然后用 300xg 离心 3 分钟。弃去上清液,用新鲜培养基重悬细胞,并将其转移到已装有新鲜培养基的新烧瓶中。
- Seeding density
- 建议的接种密度为1×10⁴个细胞/平方厘米。
- Fluid renewal
- 每 3 至 5 天
- Post-thaw recovery
- 让细胞粘附至少 24 到 48 小时。
- Thawing and culturing
Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.
Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.
For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.
Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.
Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.
Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.
Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.
Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.
07Quality control and cryopreservation
- Sterility
使用基于 PCR 的检测方法和基于发光的支原体检测方法排除支原体污染。
为确保没有细菌、真菌或酵母菌污染,每天都要对细胞培养物进行目视检查。
- Freeze medium
- 我们使用完全生长培养基(包括 FBS)+10% DMSO 或 CM-1(Cytion 商品目录编号 800100)作为冷冻保存培养基,以获得足够的解冻后存活率,CM-1(Cytion 商品目录编号 800100)含有优化的渗透保护剂和代谢稳定剂,可提高恢复能力并减少冷冻引起的应激。
- Storage conditions
如需长期保存,可将样品瓶放入气相液氮中,温度约为 -150 至 -196 ℃。在-80 °C下保存只能作为转入液氮前的短暂过渡。
- Shipping conditions
冷冻保存的细胞系用干冰装运,并用经过验证的隔热包装和足够的制冷剂在整个运输过程中保持约 -78 °C 的温度。收到货后,应立即检查容器,并立即将小瓶转移到适当的储藏室。
08Donor
- Donor age
- 成人
09Legal and safety
- Safety precautions
- 计划将低温样品储存在液氮中以便将来解冻时,必须遵守严格的安全措施。在将冷冻样本移入或移出液氮罐时,必须穿戴适当的防护手套和防护服,并使用面罩或安全护目镜。这样做是为了降低在移出时因冷冻样品爆炸而造成伤害的风险,因为爆炸可能导致锋利的碎片飞溅。
- Disclaimer
- 我们提供的细胞仅用于体外实验室研究目的,不用于临床或诊断用途,也不得用于人类或兽医目的。用户必须遵守在研究环境中处理和使用这些细胞的所有适用准则和法规。
- Warranty
在Cytion,我们保证产品的质量和活力。 我们保证,从我们的工厂发货后 60 天内,我们的细胞在开始培养时都是存活的。 我们保证所有材料均符合分析证书和/或产品说明书中描述的规格。
有关详细信息,请参阅我们的 <a href="" /Who-we-are/Warranty/"" hreflang=""x-default"">保修声明 。
- Material Transfer Agreement required
- Yes
.jpg)