Skip to content
Caov-3
Tissue
卵巢
Disease
高级别卵巢浆液性腺癌
Synonyms
CaOv-3, CaOV-3, CAOV-3, CAOV3, CaOV3, CaOv3, Caov3, CA-OV-3

Documents

Caov-3

Cell line · Product number 300319

Caov-3 cells are derived from the ovary of a 54-year-old Caucasian woman with adenocarcinoma, provide researchers with a representative model for high-gra...

US$450.00excl. tax and shipping
In stock
Lot
Recommended (freshest lot)
  • CoA
1

01General information

Description

Caov-3 细胞来源于一名 54 岁患有腺癌的高加索妇女的卵巢,为研究人员提供了一个具有代表性的高级别卵巢癌模型。该细胞系建立于 1976 年,此后被用于多项研究。

Caov-3 细胞的上皮形态与原发性卵巢癌细胞的特征非常相似。在培养过程中,这些细胞会形成密集的菌落,与在人体内观察到的行为相似。它们的独特特性使其成为研究人员研究卵巢癌细胞的生长、行为和反应的理想选择。

该领域的一项重要发现是全反式维甲酸对 Caov-3 细胞的影响。研究表明,这种化合物能抑制体外卵巢癌细胞的生长。此外,Caov-3 细胞表达各种肿瘤相关抗原,包括 NB/70K、CA-125、Ba-2 和 Ca-1,这增加了它们在靶向疗法和免疫疗法研究中的用途。

Caov-3 细胞的基因组表现出明显的异常,这也是它们具有致瘤特性的原因。例如,这些细胞中的 p53 抑癌基因发生了无义突变,并拥有多个卵巢癌癌基因 PIK3CA 的拷贝,而 PIK3CA 在癌症的发生和发展中起着至关重要的作用。在药物敏感性方面,Caov-3 细胞对几种常用的化疗药物都有反应。

已证明长春新碱、顺铂和阿霉素对这些细胞有作用。Caov-3 细胞的另一个特点是它们在不同培养条件下的行为。虽然这些细胞不会在软琼脂中生长,但当它们被注射到免疫力低下的小鼠体内时,就会表现出致瘤特性。因此,在众多研究应用中,Caov-3 细胞尤其适合三维细胞培养实验。

由于其上皮形态和形成密集菌落的能力,它们是在更贴近生理的环境中研究细胞-细胞相互作用、组织结构和卵巢癌细胞行为的理想选择。不过,在实验设计中必须考虑到长达约 78 小时的倍增时间。

Tissue
卵巢
Disease
高级别卵巢浆液性腺癌
Synonyms
  • CaOv-3
  • CaOV-3
  • CAOV-3
  • CAOV3
  • CaOV3
  • CaOv3
  • Caov3
  • CA-OV-3

02Classification

Organism
Human
Sex
Female
Growth properties
Adherent
Biosafety level
1

03Characteristics

Morphology
上皮样

04Identifiers

Citation
Caov-3 (Cytion 目录号 300319)
NCBI TaxID
9606
Cellosaurus
CVCL_0201

05Expression and susceptibility

Isoenzymes
AK-1,1,ES-D,1,G6PD,B,GLO-I,1-2,Me-2,2,PGM1,1,PGM3,1

06Handling and culture

Culture medium
DMEM,w:4.5 克/升葡萄糖,w:4 毫摩尔 L-谷氨酰胺,w:3.7 克/升 NaHCO3,w:1.0 毫摩尔丙酮酸钠(Cytion 编号 820300a)。
Incubation atmosphere

37°C, 5%CO2, 加湿环境。

Supplements
在培养基中添加 10% FBS
Dissociation reagent
TrypLE Express 10 分钟,37°C
Subculturing
去除粘附细胞上的旧培养基,用不含钙和镁的 PBS 冲洗。T25 烧瓶用 3-5 毫升 PBS,T75 烧瓶用 5-10 毫升。然后用 Accutase 完全覆盖细胞,T25 烧瓶用 1-2 毫升,T75 烧瓶用 2.5 毫升。让细胞在室温下孵育 8-10 分钟,使其分离。孵育后,用 10 毫升培养基轻轻混合细胞使其重悬,然后用 300xg 离心 3 分钟。弃去上清液,用新鲜培养基重悬细胞,并将其转移到已装有新鲜培养基的新烧瓶中。
Thawing and culturing
  1. Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.

  2. Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.

  3. For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.

  4. Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.

  5. Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.

  6. Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.

  7. Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.

  8. Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.

07Quality control and cryopreservation

Sterility

使用基于 PCR 的检测方法和基于发光的支原体检测方法排除支原体污染。

为确保没有细菌、真菌或酵母菌污染,每天都要对细胞培养物进行目视检查。

Freeze medium
我们使用完全生长培养基(包括 FBS)+10% DMSO 或 CM-1(Cytion 商品目录编号 800100)作为冷冻保存培养基,以获得足够的解冻后存活率,CM-1(Cytion 商品目录编号 800100)含有优化的渗透保护剂和代谢稳定剂,可提高恢复能力并减少冷冻引起的应激。
Storage conditions

如需长期保存,可将样品瓶放入气相液氮中,温度约为 -150 至 -196 ℃。在-80 °C下保存只能作为转入液氮前的短暂过渡。

Shipping conditions

冷冻保存的细胞系用干冰装运,并用经过验证的隔热包装和足够的制冷剂在整个运输过程中保持约 -78 °C 的温度。收到货后,应立即检查容器,并立即将小瓶转移到适当的储藏室。

08Donor

Donor age
54 年
Ethnicity
欧洲