
- Tissue
- 舌头
- Disease
- 鳞状细胞癌
- Synonyms
- Cal-33, CAL 33, CAL33, CAL-SCC-33, Centre Antoine Lacassagne-33
Documents
CAL33
Cell line · Product number 305496
The CAL-33 cell line is a human squamous cell carcinoma line derived from a primary tumor of the tongue. Established from a male patient with moderately d...
Recommended (freshest lot)
01General information
- Description
CAL-33细胞系是一种源自舌部原发肿瘤的人类鳞状细胞癌细胞系。该细胞系由一名男性患者的中分化鳞状细胞癌组织建立,以体外强劲的增殖能力及注射至免疫缺陷小鼠后的致瘤性著称。这些细胞呈现多边形上皮形态,细胞倍增时间约为43小时。 基于其来源特性,CAL-33成为研究口腔及头颈部鳞状细胞癌(HNSCC)生物学机制的有效模型,尤其适用于需要HPV阴性癌模型的研究场景。
在放射肿瘤学研究中,CAL-33因其具有不同程度放射抵抗性与放射敏感性的亚克隆而尤为珍贵。对这些亚克隆的研究表明,其独特的基因组和转录组特征导致了差异化的辐射反应。 CAL-33的放射抵抗相关通路包括DNA修复、细胞衰老、凋亡及PI3K/AKT信号传导,同时涉及衰老相关分泌表型(SASP)相关基因。这些特性使其成为探究辐射诱导细胞反应、识别潜在治疗靶点以克服HNSCC放射抵抗的重要工具。
此外,CAL-33细胞系因对多种化疗药物敏感,亦被用于药物敏感性研究。其应用范围涵盖基础致癌通路解析、应用治疗学及放射学研究等多元领域,使CAL-33成为口腔侵袭性鳞状细胞癌研究中备受瞩目的细胞系。
- Tissue
- 舌头
- Disease
- 鳞状细胞癌
- Synonyms
- Cal-33
- CAL 33
- CAL33
- CAL-SCC-33
- Centre Antoine Lacassagne-33
02Classification
- Organism
- Human
- Sex
- Male
- Growth properties
- Adherent
- Biosafety level
- 1
03Characteristics
- Morphology
- 上皮样
04Identifiers
- Citation
- CAL33(赛通产品编号305496)
- NCBI TaxID
- 9606
- Cellosaurus
- CVCL_1108
05Expression and susceptibility
- Mutational profile
- 突变:TMPRSS2,p.Gly8Val(c.23G>T)(c.-57+99G>T),纯合子;突变:TP53,p.Arg175His(c.524G>A)
06Handling and culture
- Culture medium
- DMEM,w:4.5 克/升葡萄糖,w:4 毫摩尔 L-谷氨酰胺,w:3.7 克/升 NaHCO3,w:1.0 毫摩尔丙酮酸钠(Cytion 编号 820300a)。
- Incubation atmosphere
37°C, 5%CO2, 加湿环境。
- Supplements
- 在培养基中添加 10% FBS
- Dissociation reagent
- Accutase
- Subculturing
- 去除粘附细胞上的旧培养基,用不含钙和镁的 PBS 冲洗。T25 烧瓶用 3-5 毫升 PBS,T75 烧瓶用 5-10 毫升。然后用 Accutase 完全覆盖细胞,T25 烧瓶用 1-2 毫升,T75 烧瓶用 2.5 毫升。让细胞在室温下孵育 8-10 分钟,使其分离。孵育后,用 10 毫升培养基轻轻混合细胞使其重悬,然后用 300xg 离心 3 分钟。弃去上清液,用新鲜培养基重悬细胞,并将其转移到已装有新鲜培养基的新烧瓶中。
- Seeding density
- 1 - 2 × 10⁴ 个细胞/平方厘米
- Thawing and culturing
Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.
Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.
For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.
Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.
Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.
Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.
Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.
Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.
07Quality control and cryopreservation
- Sterility
使用基于 PCR 的检测方法和基于发光的支原体检测方法排除支原体污染。
为确保没有细菌、真菌或酵母菌污染,每天都要对细胞培养物进行目视检查。
- Freeze medium
- 我们使用完全生长培养基(包括 FBS)+10% DMSO 或 CM-1(Cytion 商品目录编号 800100)作为冷冻保存培养基,以获得足够的解冻后存活率,CM-1(Cytion 商品目录编号 800100)含有优化的渗透保护剂和代谢稳定剂,可提高恢复能力并减少冷冻引起的应激。
- Storage conditions
如需长期保存,可将样品瓶放入气相液氮中,温度约为 -150 至 -196 ℃。在-80 °C下保存只能作为转入液氮前的短暂过渡。
- Shipping conditions
冷冻保存的细胞系用干冰装运,并用经过验证的隔热包装和足够的制冷剂在整个运输过程中保持约 -78 °C 的温度。收到货后,应立即检查容器,并立即将小瓶转移到适当的储藏室。
08Donor
- Donor age
- 69 岁
- Ethnicity
- 高加索人
09Legal and safety
- Safety precautions
- 计划将低温样品储存在液氮中以便将来解冻时,必须遵守严格的安全措施。在将冷冻样本移入或移出液氮罐时,必须穿戴适当的防护手套和防护服,并使用面罩或安全护目镜。这样做是为了降低在移出时因冷冻样品爆炸而造成伤害的风险,因为爆炸可能导致锋利的碎片飞溅。
- Warranty
在Cytion,我们保证产品的质量和活力。 我们保证,从我们的工厂发货后 60 天内,我们的细胞在开始培养时都是存活的。 我们保证所有材料均符合分析证书和/或产品说明书中描述的规格。
有关详细信息,请参阅我们的 <a href="" /Who-we-are/Warranty/"" hreflang=""x-default"">保修声明 。
- Material Transfer Agreement required
- Yes