
- Tissue
- 卵巢
- Disease
- 浆液性囊腺癌
- Metastatic site
- 腹水
- Synonyms
- SKOV-3, SK-OV3, SK.OV.3, SKOV3, Skov3, SKO3
Documents
SK-OV-3
Cell line · Product number 300342
SK-OV-3 cells, also known as SKOV3 cells, were derived from the ascitic fluid of a 64-year-old Caucasian female with ovarian cancer, are used in the study...
Recommended (freshest lot)
01General information
- Description
SK-OV-3细胞(亦称SKOV3细胞)源自一名64岁白种卵巢癌女性患者的腹腔积液,常用于研究卵巢癌亚型——浆液性囊腺癌。 该细胞系以其对肿瘤坏死因子及多种细胞毒性药物(包括顺铂)的耐药性著称,凸显了卵巢癌化疗的治疗难点,使其成为研究顺铂耐药机制及探索新型治疗策略的理想模型。
抗氧化系统(包括硫氧还蛋白抗氧化系统Trx)对SK-OV-3细胞的存活与耐药性至关重要,为提高癌细胞对化疗敏感性的干预提供了靶点。通过槲皮素等化合物调节抗氧化系统并诱导SK-OV-3细胞凋亡的研究,揭示了膳食抗氧化剂在癌症治疗中的潜在价值。
除研究药物耐药性外,SK-OV-3细胞还被用于探究卵巢癌细胞的侵袭行为及癌细胞与肿瘤微环境的相互作用,包括M0型与M2型巨噬细胞在肿瘤进展中的作用。 SK-OV-3细胞在癌症研究中的应用还延伸至异种移植模型的开发,以及利用萤火虫荧光素酶等报告基因监测体内肿瘤生长与转移。
总体而言,SK-OV-3细胞作为关键模型,能帮助我们理解卵巢癌的复杂性——从驱动耐药性的分子机制、雌激素信号传导,到癌细胞与肿瘤微环境的相互作用。
- Tissue
- 卵巢
- Disease
- 浆液性囊腺癌
- Metastatic site
- 腹水
- Synonyms
- SKOV-3
- SK-OV3
- SK.OV.3
- SKOV3
- Skov3
- SKO3
02Classification
- Organism
- Human
- Sex
- Female
- Growth properties
- Adherent
- Biosafety level
- 1
03Characteristics
- Tumourigenic
- 形成与卵巢原发癌一致的中度分化腺癌
- Karyotype
- (P16)低二倍体到低四倍体,具有双中心和大远心
04Identifiers
- Citation
- SK-OV-3(Cytion 目录号 300342)
- NCBI TaxID
- 9606
- Cellosaurus
- CVCL_0532
05Expression and susceptibility
- Isoenzymes
- PGM3,1,PGM1,1-2,ES-D,1,Me-2,1,AK-1,1,GLO-1,1-2,G6PD,B,表型频率产品: 0.0311
06Handling and culture
- Culture medium
- DMEM:Ham's F12(1:1),w: 3.1 g/L 葡萄糖,w: 2.5 mM L-谷氨酰胺,w: 15 mM HEPES,w: 0.5 mM 丙酮酸钠,w: 1.2 g/L NaHCO3(Cytion 文章编号 820400a)。
- Incubation atmosphere
37°C, 5%CO2, 加湿环境。
- Supplements
- 在培养基中添加 10% FBS
- Dissociation reagent
- Accutase
- Subculturing
- 去除粘附细胞上的旧培养基,用不含钙和镁的 PBS 冲洗。T25 烧瓶用 3-5 毫升 PBS,T75 烧瓶用 5-10 毫升。然后用 Accutase 完全覆盖细胞,T25 烧瓶用 1-2 毫升,T75 烧瓶用 2.5 毫升。让细胞在室温下孵育 8-10 分钟,使其分离。孵育后,用 10 毫升培养基轻轻混合细胞使其重悬,然后用 300xg 离心 3 分钟。弃去上清液,用新鲜培养基重悬细胞,并将其转移到已装有新鲜培养基的新烧瓶中。
- Seeding density
- 1 × 10⁴ 个细胞/平方厘米
- Post-thaw recovery
- 解冻后,将细胞以5×10⁴个细胞/平方厘米的密度接种于培养皿中,使细胞从冷冻过程中恢复并至少贴壁24小时。
- Thawing and culturing
Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.
Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.
For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.
Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.
Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.
Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.
Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.
Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.
07Quality control and cryopreservation
- Sterility
使用基于 PCR 的检测方法和基于发光的支原体检测方法排除支原体污染。
为确保没有细菌、真菌或酵母菌污染,每天都要对细胞培养物进行目视检查。
- Freeze medium
- 我们使用完全生长培养基(包括 FBS)+10% DMSO 或 CM-1(Cytion 商品目录编号 800100)作为冷冻保存培养基,以获得足够的解冻后存活率,CM-1(Cytion 商品目录编号 800100)含有优化的渗透保护剂和代谢稳定剂,可提高恢复能力并减少冷冻引起的应激。
- Storage conditions
如需长期保存,可将样品瓶放入气相液氮中,温度约为 -150 至 -196 ℃。在-80 °C下保存只能作为转入液氮前的短暂过渡。
- Shipping conditions
冷冻保存的细胞系用干冰装运,并用经过验证的隔热包装和足够的制冷剂在整个运输过程中保持约 -78 °C 的温度。收到货后,应立即检查容器,并立即将小瓶转移到适当的储藏室。
08Donor
- Donor age
- 64 岁
- Ethnicity
- 高加索人
09Legal and safety
- Safety precautions
- 计划将低温样品储存在液氮中以便将来解冻时,必须遵守严格的安全措施。在将冷冻样本移入或移出液氮罐时,必须穿戴适当的防护手套和防护服,并使用面罩或安全护目镜。这样做是为了降低在移出时因冷冻样品爆炸而造成伤害的风险,因为爆炸可能导致锋利的碎片飞溅。
- Warranty
在Cytion,我们保证产品的质量和活力。 我们保证,从我们的工厂发货后 60 天内,我们的细胞在开始培养时都是存活的。 我们保证所有材料均符合分析证书和/或产品说明书中描述的规格。
有关详细信息,请参阅我们的 <a href="" /Who-we-are/Warranty/"" hreflang=""x-default"">保修声明 。
- Material Transfer Agreement required
- Yes






.jpg)