PC-3M
Cell line · Product number 305061
The PC-3M cell line is a metastatic variant derived from the human prostate adenocarcinoma PC-3 cell line, originally isolated from a bone metastasis of a...
Recommended (freshest lot)
01General information
- Description
PC-3M 細胞系是源自人類前列腺腺癌 PC-3 細胞系的轉移性變異株,最初是從一名前列腺癌患者的骨轉移病灶中分離出來的。 建立 PC-3M 細胞系的目的是為了更精確地模擬前列腺癌的轉移潛能。相較於其親代細胞系,該細胞系展現出更強的遷移與侵襲能力,使其成為研究轉移分子機制以及評估針對轉移性前列腺癌治療干預措施的重要工具。
PC-3M 細胞已被應用於各種體外與體內研究,用以探究腫瘤進展及治療抗藥性機制。該細胞對多種培養條件具有適應性,無論在標準培養環境或動物模型中均展現強勁的生長能力。 值得注意的是,PC-3M 細胞系已廣泛應用於異種移植研究,在該研究中,它展現出高效形成腫瘤及轉移的能力,重現了晚期前列腺癌的關鍵特徵。這使其成為測試抗轉移藥物及闡明驅動轉移擴散路徑的無價模型。
除了其轉移特性外,PC-3M 亦被用於探索腫瘤細胞與微環境之間的相互作用,包括基質細胞和細胞外基質成分在促進癌症進展中的作用。 該細胞系亦表達與前列腺癌相關的生物標記物,例如前列腺特異性抗原(PSA),且適合進行基因組與蛋白質組分析,使研究人員得以探究分子途徑並識別潛在的治療標靶。
- Tissue
- 前列腺
- Disease
- 前列腺癌
- Metastatic site
- 骨頭
- Synonyms
- PC3-M
- PC-3/M
- PC3M
- Pc3M
02Classification
- Organism
- Human
- Sex
- Male
- Growth properties
- Adherent
- Biosafety level
- 1
03Characteristics
- Morphology
- 上皮性
04Identifiers
- Citation
- PC-3M(Cytion 型號 305061)
- NCBI TaxID
- 9606
- Cellosaurus
- CVCL_9555
05Handling and culture
- Culture medium
- Ham's F12K 中型培養基,含:2.0 mM L-谷氨醯胺、2.0 mM 丙酮酸鈉、2.5 g/L NaHCO₃(Cytion 產品編號 820608a)
- Incubation atmosphere
37°C,5% CO₂,加濕環境。
- Supplements
- 在培養基中加入 10% 的胎牛血清(FBS)
- Dissociation reagent
- Accutase
- Subculturing
- 從貼壁細胞中移除舊培養基,並用不含鈣和鎂的PBS洗滌細胞。T25培養瓶使用3-5毫升PBS,T75培養瓶則使用5-10毫升。 接著,用 Accutase 完全覆蓋細胞,T25 培養瓶使用 1–2 毫升,T75 培養瓶則使用 2.5 毫升。將細胞於室溫下孵育 8–10 分鐘,使其脫附。 孵育後,將細胞與 10 毫升培養基輕柔混合以使其重新懸浮,然後以 300xg 離心 3 分鐘。棄去上清液,將細胞重新懸浮於新鮮培養基中,並轉移至已預先加入新鮮培養基的新培養瓶中。
- Fluid renewal
- 每週 2 至 3 次
- Thawing and culturing
Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.
Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.
For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.
Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.
Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.
Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.
Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.
Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.
06Quality control and cryopreservation
- Sterility
透過基於 PCR 的檢測及基於發光原理的支原體檢測方法,排除支原體污染的可能性。
為確保無細菌、真菌或酵母菌污染,每日均會對細胞培養物進行目視檢查。
- Freeze medium
- 作為冷凍保存培養基,我們使用完全生長培養基(含 FBS)+ 10% DMSO 以確保解凍後的存活率,或使用 CM-1 (Cytion 型號 800100),該培養基含有經優化的滲透保護劑和代謝穩定劑,可提升細胞恢復率並減輕冷凍誘導的壓力。
- Storage conditions
若需長期保存,請將試管置於溫度約為 −150 至 −196 °C 的氣相液氮中。僅在轉移至液氮之前,可將試管暫時存放於 −80 °C 環境中,作為短期過渡步驟。
- Shipping conditions
冷凍保存的細胞系會以乾冰冷藏,並裝於經驗證的隔熱包裝中,包裝內含有足夠的冷媒,以確保在運輸過程中溫度維持在約 −78 °C。收到貨物後,請立即檢查容器,並盡快將試管轉移至適當的儲存場所。
07Donor
- Donor age
- 62年
08Legal and safety
- Safety precautions
- 若計劃將低溫試管存放在液態氮中以供日後解凍,必須嚴格遵守相關安全措施。 必須穿戴適當的防護手套和防護服,且在將冷凍樣本移入或移出液氮罐時,必須佩戴口罩或安全護目鏡。此舉旨在降低因取出時冷凍試管可能發生爆炸而導致受傷的風險,此類爆炸可能造成尖銳碎片飛濺。
- Warranty
在 Cytion,我們對產品的品質與存活率提供保障。 我們保證,自本公司設施出貨後 60 天內,我們的細胞在培養開始時仍具存活能力。 我們保證所有材料均符合 分析證明書及/或產品說明書中所載的規格。
詳情請參閱我們的 《保固聲明》。
- Material Transfer Agreement required
- Yes
