PC3
Cell line · Product number 300312
PC3 cells, derived from the bone metastasis in a 62-year-old Caucasian male with grade IV prostatic adenocarcinoma, are a cornerstone in the study of huma...
Recommended (freshest lot)
01General information
- Description
PC3 細胞源自一名 62 歲白人男性患者的骨轉移病灶,該患者罹患第四期前列腺腺癌,此細胞系是人類前列腺癌研究的重要基礎。 PC-3人類前列腺癌細胞系廣泛應用於研究前列腺癌的分子與細胞層面,特別是在轉移性疾病的背景下。其高度的轉移潛能,使其成為研究晚期前列腺癌的寶貴模型。
作為上皮細胞,PC3 細胞對雄激素缺乏反應,且不受類固醇或成纖維細胞生長因子等典型生長因子的影響,這使其在人類前列腺癌細胞中佔據獨特地位,適合用於研究科恩明賓(koenimbin)及其他潛在治療藥物的影響。
PC3 細胞不表達前列腺特異性抗原(PSA),且睪固酮-5-α還原酶與酸性磷酸酶的活性較低,這使其有別於 LNCaP 和 DU145 等其他前列腺癌細胞模型, 前者以表達管腔分化標記物(如雄激素受體和PSA)而聞名,後者則代表前列腺癌具有中等程度的轉移潛力。
此外,有觀察顯示 PC3 前列腺癌細胞系中的一部分會形成癌症幹細胞全克隆,這進一步凸顯了該細胞系在前列腺癌幹細胞研究中的重要性。 此特性使 PC3 細胞系成為研究腫瘤環境的關鍵模型,特別是透過異種移植模型,利用 PC3 異種移植腫瘤來研究腫瘤的生長及對治療的反應。
總而言之,源自 IV 級前列腺腺癌的 PC3 細胞,因其高度的轉移潛力、獨特的雄激素獨立性以及鮮明的細胞特徵,成為前列腺癌研究中的關鍵模型。 其多功能性涵蓋從轉移的分子研究,到治療反應的探索以及前列腺癌幹細胞的研究,使其成為深化我們對前列腺癌複雜性及潛在治療方法理解的無價資源。
- Tissue
- 前列腺
- Disease
- 腺癌
- Metastatic site
- 骨頭
- Applications
- 轉染宿主
- Synonyms
- PC-3
- PC.3
02Classification
- Organism
- Human
- Sex
- Male
- Growth properties
- Adherent and suspension
- Biosafety level
- 1
03Characteristics
- Morphology
- 上皮樣
- Tumourigenic
- 是的,在裸鼠身上
- Karyotype
- PC3 細胞的核型最顯著的特徵在於其為三倍體,且含有多種染色體異常,這些異常正是導致其侵襲性強的原因。
- Doubling time
- 40 小時
04Identifiers
- Citation
- PC3(Cytion 型號 300312)
- NCBI TaxID
- 9606
- Cellosaurus
- CVCL_0035
05Expression and susceptibility
- Antigen expression
- HLA A1、A9
06Handling and culture
- Culture medium
- DMEM:Ham's F12(1:1),重量比:3.1 g/L 葡萄糖,重量比:2.5 mM L-谷氨酰胺,重量比:15 mM HEPES, w: 0.5 mM 丙酮酸鈉,w: 1.2 g/L NaHCO₃(Cytion 產品編號 820400a)
- Incubation atmosphere
37°C,5% CO₂,加濕環境。
- Supplements
- 在培養基中加入 5% 的胎牛血清(FBS)
- Dissociation reagent
- Accutase
- Subculturing
- 從貼壁細胞中移除舊培養基,並用不含鈣和鎂的PBS洗滌細胞。T25培養瓶使用3-5毫升PBS,T75培養瓶則使用5-10毫升。 接著,用 Accutase 完全覆蓋細胞,T25 培養瓶使用 1–2 毫升,T75 培養瓶則使用 2.5 毫升。將細胞於室溫下孵育 8–10 分鐘,使其脫附。 孵育後,將細胞與 10 毫升培養基輕柔混合以使其重新懸浮,然後以 300xg 離心 3 分鐘。棄去上清液,將細胞重新懸浮於新鮮培養基中,並轉移至已預先加入新鮮培養基的新培養瓶中。
- Seeding density
- 起始接種密度為 3 × 10⁴ 細胞/cm²。細胞恢復後,後續的分瓶步驟請採用 1 × 10⁴ 細胞/cm² 的接種密度。
- Fluid renewal
- 每週 2 至 3 次
- Post-thaw recovery
- 解凍後,將細胞以 5 × 10⁴ 個細胞/cm² 的密度接種於培養皿中,並讓細胞從冷凍過程中恢復,並附著至少 24 小時。
- Thawing and culturing
Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.
Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.
For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.
Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.
Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.
Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.
Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.
Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.
07Quality control and cryopreservation
- Sterility
透過基於 PCR 的檢測及基於發光原理的支原體檢測方法,排除支原體污染的可能性。
為確保無細菌、真菌或酵母菌污染,每日均會對細胞培養物進行目視檢查。
- Freeze medium
- 作為冷凍保存培養基,我們使用完全生長培養基(含 FBS)+ 10% DMSO 以確保解凍後的存活率,或使用 CM-1 (Cytion 型號 800100),該培養基含有經優化的滲透保護劑和代謝穩定劑,可提升細胞恢復率並減輕冷凍誘導的壓力。
- Storage conditions
若需長期保存,請將試管置於溫度約為 −150 至 −196 °C 的氣相液氮中。僅在轉移至液氮之前,可將試管暫時存放於 −80 °C 環境中,作為短期過渡步驟。
- Shipping conditions
冷凍保存的細胞系會以乾冰冷藏,並裝於經驗證的隔熱包裝中,包裝內含有足夠的冷媒,以確保在運輸過程中溫度維持在約 −78 °C。收到貨物後,請立即檢查容器,並盡快將試管轉移至適當的儲存場所。
08Donor
- Donor age
- 62年
- Ethnicity
- 高加索人
09Legal and safety
- Safety precautions
- 若計劃將低溫試管存放在液態氮中以供日後解凍,必須嚴格遵守相關安全措施。 必須穿戴適當的防護手套和防護服,且在將冷凍樣本移入或移出液氮罐時,必須佩戴口罩或安全護目鏡。此舉旨在降低因取出時冷凍試管可能發生爆炸而導致受傷的風險,此類爆炸可能造成尖銳碎片飛濺。
- Warranty
在 Cytion,我們對產品的品質與存活率提供保障。 我們保證,自本公司設施出貨後 60 天內,我們的細胞在培養開始時仍具存活能力。 我們保證所有材料均符合 分析證明書及/或產品說明書中所載的規格。
詳情請參閱我們的 《保固聲明》。
- Material Transfer Agreement required
- Yes
.jpg)

.jpg)
