Skip to content
PC-12
Tissue
肾上腺
Disease
嗜铬细胞瘤
Metastatic site
不适用(肾上腺髓质嗜铬细胞瘤;原发肿瘤部位为肾上腺)
Synonyms
PC 12, PC12

Documents

PC-12

Cell line · Product number 500311

PC-12 cells are a cell line derived from a pheochromocytoma of the rat adrenal medulla. These cells are of embryonic origin, grow adherently and resemble ...

US$395.00excl. tax and shipping
In stock
Lot
Recommended (freshest lot)
  • CoA
1

01General information

Description

PC-12 细胞是一种从大鼠肾上腺髓质嗜铬细胞瘤中提取的细胞系。这些细胞来源于胚胎,粘附生长,类似于神经母细胞和嗜酸性细胞的混合物。PC-12 细胞是儿茶酚胺细胞,能合成、储存和释放去甲肾上腺素和多巴胺。它们的直径约为 10-12 微米,是形状不规则的小细胞。PC12 细胞系是一种经典的神经元细胞模型,因为它能在神经生长因子(NGF)的作用下获得交感神经元的特征。

对多巴胺调节的研究表明,PC12 细胞能合成、释放和再摄取多巴胺,并在神经分泌、离子通道和神经递质受体方面具有广泛的特征。此外,在分化过程中,各种亚型钙离子通道的相对比例也会发生变化。PC12 细胞系是一种成熟的神经元细胞模型,特别适用于研究细胞对神经生长因子(NGF)的反应,以及这些反应如何导致分化特异性蛋白的表达和分化。在 NGF 中培养时,PC12 细胞会在形态和功能上分化为交感神经节神经元。这种分化是 NGF 可逆地诱导神经元表型的结果。研究表明,通过 NGF 处理,胶原涂层有利于在神经元长度和神经元密度方面实现神经元特征。

PC12 细胞具有致瘤性,来自雄性新英格兰女执事医院品系大鼠。PC-12 细胞系有 40 条染色体,其中 38 条为常染色体,另外还有 xY 染色体。神经生长因子(NGF)在 PC12 细胞中表达,暴露于 NGF 是细胞分化的一个重要调节因子。

总之,PC12 细胞是神经生物学中一种用途广泛的模型系统,因为它们在接触神经生长因子(NGF)时能够获得交感神经元的特征。这些细胞在神经分泌、离子通道和神经递质受体方面具有广泛的特征。它们在药理测试方面具有极强的多功能性,而且是研究神经元细胞增殖和分化的成熟模型,这使它们成为神经生物学研究的重要工具。

Tissue
肾上腺
Disease
嗜铬细胞瘤
Metastatic site
不适用(肾上腺髓质嗜铬细胞瘤;原发肿瘤部位为肾上腺)
Applications
神经生物学研究;NGF诱导的神经元分化;多巴胺和儿茶酚胺生理学;神经分泌;离子通道(钙、钠);神经递质受体药理学;神经保护筛选;帕金森病模型
Synonyms
  • PC 12
  • PC12

02Classification

Organism
Rat
Sex
Male
Growth properties
Adherent and suspension
GMO status
Non-GMO
GMO status details
No genetic modification; wildtype rat pheochromocytoma cell line
Biosafety level
1

03Characteristics

Morphology
多边形
Cell type
嗜铬细胞瘤细胞(神经内分泌/嗜铬细胞)
Tumourigenic
是的,在新英格兰女执事医院的菌株大鼠中
Karyotype
40 条染色体,38 条常染色体加 xY

04Identifiers

Citation
PC-12(Cytion 目录号 500311)
NCBI TaxID
10116
Cellosaurus
CVCL_S979

05Expression and susceptibility

Receptors expressed
神经生长因子(NGF)
Products
儿茶酚胺、多巴胺

06Handling and culture

Culture medium
RPMI 1640,w:2.0 mM 稳定谷氨酰胺,w:2.0 g/L NaHCO3(Cytion 文章编号 820700a)。
Incubation atmosphere

37°C, 5%CO2, 加湿环境。

Supplements
在培养基中添加 10% FBS
Dissociation reagent
TrypLE Express(在胶原蛋白上贴壁);用于悬浮培养的移液重悬
Flask coating
胶原蛋白
Subculturing
悬浮细胞:用新鲜培养基移取基质中的细胞。若要获得单细胞,可将悬浮液通过 22 号针头数次,然后分装到新的烧瓶中。在胶原上生长:要移除粘附的细胞,请使用以下标准方案。去除培养基,用不含钙和镁的 PBS 冲洗附着细胞(T25 细胞培养瓶用 3-5 毫升 PBS,T75 细胞培养瓶用 5-10 毫升)。加入 TrypleExpress(每个 T25 细胞培养瓶 1-2 毫升,每个 T75 细胞培养瓶 2.5 毫升),细胞片必须完全覆盖。在 37 摄氏度下培养 10 分钟。小心重悬细胞,可选择添加培养基,但不是必须的,然后分装到装有新鲜培养基的新培养瓶中。
Seeding density
1 × 10⁴ 个细胞/平方厘米
Fluid renewal
每周 2 至 3 次
Post-thaw recovery
解冻后,将细胞以5×10⁴个细胞/平方厘米的密度接种于培养皿中,让细胞从冷冻过程中恢复并至少贴壁48小时。
Thawing and culturing
  1. Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit.

  2. Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required.

  3. For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains.

  4. Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening.

  5. Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently.

  6. Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium.

  7. Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth.

  8. Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.

07Quality control and cryopreservation

Sterility

使用基于 PCR 的检测方法和基于发光的支原体检测方法排除支原体污染。

为确保没有细菌、真菌或酵母菌污染,每天都要对细胞培养物进行目视检查。

Freeze medium
作为冷冻保存培养基,我们使用 50% 基础培养基 + 40% FBS + 10% DMSO 或 CM-1(Cytion 目录号 800100),其中包括优化的渗透保护剂和代谢稳定剂,以促进恢复并减少冷冻引起的应激。
Storage conditions

如需长期保存,可将样品瓶放入气相液氮中,温度约为 -150 至 -196 ℃。在-80 °C下保存只能作为转入液氮前的短暂过渡。

Shipping conditions

冷冻保存的细胞系用干冰装运,并用经过验证的隔热包装和足够的制冷剂在整个运输过程中保持约 -78 °C 的温度。收到货后,应立即检查容器,并立即将小瓶转移到适当的储藏室。

08Donor

Donor age
未说明
Ethnicity
日语